Double inflatable bed, what can be and what to look for

In one-room apartments of the old layout, there is always a sharp deficit of free space. This brings a lot of inconvenience to the owners, for example, the inability to receive guests with an overnight stay. In such situations, an inflatable bed comes to the rescue - a double helper in accommodating guests for the night. This piece of furniture is also relevant for life in a rented apartment, when it makes no sense to spend money on a new bed.

Models with and without pump

All existing models of air beds can be divided into 2 categories: those that are equipped with a pump, and those that require its purchase in a separate order. The product is not considered completely stationary, therefore it has gained wide popularity not only among couch potatoes, but among those who like to get out into the countryside with a tent. If the product is selected for use at home, you should pay attention to models with an integrated pump - this will greatly simplify the use of the bed.

In order to better understand which model best meets the requirements of the consumer, it is worthwhile to separately consider the description of a double inflatable bed with and without a built-in pump:

Built-in pump - manufacturers often cover the product with anti-slip material, which keeps the sheet and other linen from wrinkling. By design, the bed with the pump consists of the same parts as the analogue without it. The only difference is the availability of a device that inflates the mattress. Inside, the product consists of strong partitions that straighten under the influence of air and allow you to hold a fairly large weight on the surface. Double inflatable options are designed to maintain the weight of two people (up to 270 kg). The pump itself is located in the side or end of the product. It is equipped with a button that has two modes: on and off. By clicking on the button, you can inflate the bed in a matter of minutes. Usually, a carrying case is included with the product, which is very convenient for camping. Also, models are equipped with instructions with detailed recommendations for use;
The lack of an integrated pump - without such a convenient device, it will take longer to inflate the bed. It is good if the electric pump will go separately, however, provided that it has a manual analogue, it will be possible to inflate the bed only for 5-10 minutes. These models are also in demand because of their compactness, because the built-in pump adds weight and dimensions to the product when folded. To prepare the bed for use, just connect the device to the pump and pump it with air.

Which model to choose from the presented products depends on where and how often it will be used. If you need a bed only at home, you should give preference to options with a pump. If the berth will be transported, or it will be used only for guests, it is better to purchase the second option without a pump. Models with inflation devices have an order of magnitude higher cost.

Dimensions and parameters

Depending on the design features, a modern double inflatable bed may differ from other models. If a regular air mattress has a maximum thickness of 23 cm, then a full double bed will be much higher. This criterion is provided by manufacturers to increase conditions for comfortable sleep: it is more convenient to sleep on high furniture than on low. In addition, the height provides additional warmth to the person, protecting him from possible drafts and cold flooring.

One of the significant advantages of inflatable products is the absence of an allergic reaction from the body. Manufacturers make items from high-quality hypoallergenic material, which prevents the appearance of dust mites and other parasites.

To choose the model that will bring the most pleasure from sleep, it is recommended to analyze the existing sizes in more detail:

Height (thickness) - a high-quality double bed will have a thickness of at least 40 cm. This is because the design has a double base to withstand increased load on the berth. Models with an integrated pump also have a high height. If the bed is designed as a sofa or transformer, its height will be even greater due to the back;
Length - the most common size - 203 cm. Such dimensions are adjusted to the average person’s growth with a margin;
Width - if a single bed can have a small berth (90-120 cm), then in double models this indicator is given special importance. The most common size is 152 cm wide. It is this indicator that allows two people of average build to freely sit on the surface. The intex double air bed just possesses the specified characteristics;
In addition to standard options, manufacturers offer beds in the following sizes: double Duble - 137 x 192 cm, double Queen - 152 x 203 cm, Royal King - 183 x 203 cm;
Dimensions when folded - the larger the bed in the unfolded form, the larger it will be deflated. And if a pump is integrated in the product, then the total volume will increase even more. Models without a pump are much more compact, they fit in a small box. Beds often come with a special carry-on bag;
Maximum load - modern manufacturers warn that the maximum load on the bed should not exceed 250-270 kg. Each manufacturer indicates its parameters, which must be adhered to. If you put too much weight on the product, it may burst or tear;
The weight of the bed during operation, as well as when carrying it, is also important. For a model with an integrated pump, it ranges from 8 to 11 kg. If the pump is missing, the bed weighs up to 9 kg.

Knowing the parameters and characteristics, as well as the dimensions of the future berth, you can pre-prepare for it the space in the room. As a rule, after use, the bed is folded into a bag and put away for storage. If the product is used daily, it is necessary to take an even place away from heat sources and furniture with sharp corners.

Types of designs

All existing models can be divided immediately into several categories, according to the type of design. If we consider the parameters of the internal partitions, then they are classic and heavy-duty. If you pay attention to the external design of the models, then they are monolithic and transformers. The beds are also divided according to the coating into vinyl and flocked. For a better understanding, it is recommended to consider each category separately:

Internal partitions - the location of the air chambers directly affects comfort during sleep. The classic I-Beam layout is used in Intex models and other manufacturers. It involves the longitudinal location of the internal partitions. The beds are particularly resilient and stiff, suitable for a comfortable sleep. In Fiber-Tech technology, the internal partitions are made of polyester fibers - they are high-strength and keep the base and surface from deformation;
Design - monolithic beds are represented by solid products. They do not require additional manipulations, it is enough to inflate the bed and you can go to bed. Transformer beds look like a sofa, and they must be laid out before going to bed;
Surface - vinyl-coated products wash and dry quickly, but they are not suitable for fixing bedding. The flocked coating is soft and able to hold the sheet in place.

There are also models consisting of two segments of a berth. Moreover, each half is considered independent: they can be inflated separately. Such a product helps to save space in the apartment.

Which manufacturers are better

Today, Intex double air beds have become the undoubted leader - for many years this company has been manufacturing products for sleep and relaxation. There are other manufacturers who also market similar models.

Manufacturer	Characteristics	pros	Minuses
Intex	The manufacturer is a world leader in the production of prefabricated and monolithic inflatable structures, ranging from pillows to double beds. The lineup is represented by budget, medium-priced and expensive models. There are options with and without an electric pump, as well as folding and monolithic models.	They withstand loads up to 273 kg, are made of waterproof materials, a special bag or box with a handle for transportation is supplied.	Of the disadvantages it is worth highlighting a lot of weight and high cost, but comfort is worth these funds.
Bestway	Many models are equipped with built-in pillows that rise above the base for a comfortable sleep. The structures are reinforced and allow a person to sit comfortably on the surface. Material does not cause trouble in leaving.	The load up to 270 kg is easily maintained by the double beds of this company. The surface is resistant to deformation and pollution, the electric pump will help to inflate the bed quickly, and the bag in the kit helps to transport the product.	A large weight of 9 kg, as well as a fairly high price of products.
Campingaz	The company specializes in the manufacture of travel mattresses, however, there are models for the home in the lines. Some models are equipped with removable polycotton sheets, which can be machine washed.	They withstand loads of up to 200 kg, are equipped with repair kits and sheets, have high tightness and relatively low weight.	Most models are not equipped with a built-in pump, which will entail additional costs for its purchase.

Having dealt with the manufacturers and the main types of models, you can safely go to the salon of inflatable furniture and choose a bed as you wish. Before buying, it is worth checking the product for integrity.